Supra setup software

What you’ll need

LA GARD locks are setup using Windows software and peripheral equipment. An auditable keypad is also required.

• If the lock has not been fitted with an auditable keypad, one can be connected to the lock temporarily for setup.

The audit and setup peripheral equipment required depends on the keypad in use. Kits are available to purchase from our online store.

---

---

To setup the lock, it must be in the pre-setup condition and open when 1 is pressed. A reset box must be plugged into the battery port of the lock, and so the safe or vault door must be open, and access to the back of the lock is required.

Reset procedure is only available to Engineers and a password is required to access the page.

LA GARD reset procedure (Password protected)

---

Download and unpack the file

• Click the button below to access a webpage where a .zip (Compressed) file with the software package can be downloaded

• On the web page that opens, click the Download button located top left on the page. Do not click the file itself

depending on your browser. Once the file has downloaded, it must be unpacked or unzipped.

• Locate then right click the file and select Extract all…. If the file has been supplied on a USB flash drive, copy the file to your computer and extract it.

If it is not possible to unpack the .zip file using the Extract all... command, download suitable unpacking software such as 7-zip

Install the Driver

Locate the folder Driver, open it and double click the file cdm20600.exe

Allow the application to run and wait for the driver to finish installing.

Install the software

Locate the folder Supra Setup v2.00. Double click the file INSTALL.EXE and follow the onscreen instructions to install it. Allow the file to run if prompted.

A shortcut will be created on the desktop and in the start menu folder under LaGard

Setup a lock

The procedure to setup a lock is only available to Engineers, and a password is required to access the page.