What you’ll need
LA GARD locks are setup using Windows software and peripheral equipment. An auditable keypad is also required.
- If the lock has not been fitted with an auditable keypad, one can be connected to the lock temporarily for setup.
The audit and setup peripheral equipment required depends on the keypad in use. Kits are available to purchase from our online store.
Audit and setup kit for 3125 keypads. Most TL11 locks are fitted with 3125 keypads.
Audit and setup kit for 5750-k keypads (Also compatible with older 3750-k keypads)
To setup the lock, it must be in the pre-setup condition and open when 1 is pressed. A reset box must be plugged into the battery port of the lock, and so the safe or vault door must be open, and access to the back of the lock is required.
Reset procedure is only available to Engineers and a password is required to access the page.
LA GARD reset procedure (Password protected)
Download and unpack the file
- Click the button below to access a webpage where a .zip (Compressed) file with the software package can be downloaded
- On the web page that opens, click the Download button
located top left on the page. Do not click the file itself
T The zipped file will download to either the downloads folder, or another location depending on your browser. Once the file has downloaded, it must be unpacked or unzipped.
- Locate then right click the file and select Extract all…. If the file has been supplied on a USB flash drive, copy the file to your computer and extract it.
If it is not possible to unpack the .zip file using the Extract all... command, download suitable unpacking software such as 7-zip
Install the Driver
Locate the folder Driver, open it and double click the file cdm20600.exe
Allow the application to run and wait for the driver to finish installing.
Run the software
TL11 setup software has not been updated in several years, as such it will not install on a Windows PC in the normal way. The software can be used simply by running the .exe file from the unpacked folder.
Locate the folder TL11 Setup v1.00TEC. Copy and paste the entire folder to a location that will be unaffected by general PC use, such as the Program Files folder on the C: drive
Open the folder and locate the file TL11 Setup v1.00TEC.exe
Either double click TL11 Setup v1.00TEC.exe to run the application, or right click and create a desktop shortcut for future use.
Select the correct language and the application will open.
Setup a lock
The procedure to setup a lock is only available to Engineers, and a password is required to access the page.
TL11 setup procedure (Password protected)